Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Double hung
Casement
Before
After
Before
After
Before
AfterMr-Glass Windows & Doors in Westchester, FL | Winslow Windows & Doors
We provide independent Mr-Glass service across Westchester, FL, and the one thing that separates our work here from anywhere else is this: Westchester sits entirely inside the Miami-Dade High Velocity Hurricane Zone, so every Mr-Glass repair or replacement we touch gets checked against the county’s Notice of Acceptance requirements. That means when a 1960s jalousie finally gives out on a CBS ranch off Coral Way, we’re not just swapping glass; we’re making sure the opening meets the strictest wind-load code in the country. Call (850) 721-1218 for a free estimate on any Mr-Glass window or door in Westchester.
Why Westchester Residents Choose Us for Mr-Glass Service
Ed Winslow grew up just minutes from Tropical Park, so he knows what Westchester’s original 1950s and 1960s houses were built with and where those materials fail first. Our crews have been rebuilding and reglazing Mr-Glass aluminum and vinyl product lines across Miami-Dade for over a decade, which means we can identify a failing torque bar or a seized roller by sight before the customer ever describes the symptom. We carry OEM-compatible balances, clips, and interlock parts for the Mr-Glass 900, 920, 820, and 700 Series, and when a part is discontinued, we cross-reference Miami-Dade NOA-compatible aftermarket components with the same load specs. Ed’s name is on the door, and he stands behind every Mr-Glass window and door we touch in Westchester.
Common Mr-Glass Windows & Doors Problems We Solve in Westchester
- Snapped jalousie clips and distorted torque bars on 900 Series louvers. Westchester’s postwar homes are full of original aluminum jalousie windows, and after decades of coastal gusts slamming the louvers, the clips and torque bars snap or bend until the glass won’t seal. We replace the hardware and, when the frame is still sound, get the louvers closing tight again.
- Dropping or sticking sashes on 920 Series double hungs. The vinyl balance shoes and block-and-tackle assemblies inside these windows wear out in 8 to 12 years here, faster than inland Florida, because Westchester’s salt-humid air and fine concrete dust from decades of CBS construction get into the channels. We rebuild or replace the balances so the sash stops dropping on your fingers.
- Pitted and seized rollers on 820 Series sliding doors. Westchester is roughly 10 miles from Biscayne Bay, and that trace salt combines with driveway dust to pit the rollers until the panel grinds or jumps track. We replace the roller assemblies and realign the track so the door slides with one hand again.
- Corroded crank gears and hinge arms on 700 Series casements. The ferrule where the crank exits the frame is the weak point; in Westchester’s wet season it corrodes and binds, usually right around the time you’re prepping for a hurricane. We free or replace the hardware so the window actually opens when you need it to.
- Impact-glazing upgrades on original Mr-Glass frames. Many Westchester homes still have single-pane Mr-Glass aluminum openings that do not meet today’s HVHZ code. We evaluate the frame condition honestly: if it can hold impact glass, we upgrade it; if it’s pitted or bowed, we say so and recommend full replacement.
Mr-Glass Service in Westchester: What Local Conditions Mean for Your Equipment
Westchester is the only Miami-Dade community where a routine Mr-Glass jalousie-to-impact replacement job gets inspected against a Notice of Acceptance number that must be visible on every glazing label. Pull a permit for a single bedroom window, and the whole house can land on the HVHZ compliance clock: the county inspector will not sign off on one non-compliant opening left anywhere in the dwelling. That’s why we treat every Window Installation in Westchester as a code-compliance job first and a parts job second. The inspector will physically verify that the glazing label matches the approved NOA number on file with Miami-Dade County, and if it doesn’t, the opening fails. We’ve seen out-of-county crews show up on SW 96th Avenue with windows that passed Florida statewide approval but lacked the stricter Miami-Dade stamp. We do not make that mistake here, because we do not want a Westchester homeowner stuck with a failed inspection and an open permit.
Mr-Glass Models & Products We Service in Westchester
We service the full Mr-Glass residential lineup: the 900 Series aluminum jalousie and awning windows, the 920 Series single and double hung vinyl, the 820 Series horizontal roller and three-panel sliders, and the 700 Series casement and picture windows. For older aluminum extrusions and jalousie hardware, we stock OEM-compatible clips, balances, and rollers locally so Westchester turnaround is measured in days, not weeks. When a Mr-Glass frame is pitted, bowed, or simply cannot hold our Impact Windows in Westchester, we tell you that replacement is cheaper than endless patchwork and show you the numbers. Winslow Windows & Doors is an independent Mr-Glass service provider; we are not manufacturer-affiliated or authorized, and that independence means we recommend what the house actually needs, not what a parts catalog pushes.
Mr-Glass Service Pricing in Westchester
Mr-Glass repair and replacement pricing in Westchester depends on the model, the failure, and whether the opening needs a permit-driven compliance upgrade. Hardware repairs like jalousie clip replacement or balance shoe work on an existing frame typically run between $180 and $340 per window. Full-frame Mr-Glass impact replacement on a 1950s CBS ranch, where we open the block opening and install a new NOA-labeled assembly, typically runs between $900 and $1,800 per opening, depending on size and glazing. Our free estimate includes a written line-item quote with fixed pricing; we don’t add change orders mid-job. Call (850) 721-1218 for an exact quote on your Mr-Glass windows or doors in Westchester.
Serving Westchester, FL - Our Local Coverage Area
We’re based in the Westchester area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mr-Glass Windows & Doors in Westchester
Yes, in practice it can. Once a permit is pulled, the Miami-Dade inspector will check the entire dwelling, and a non-compliant opening left anywhere on the house can fail the inspection. Replacing one Mr-Glass jalousie often starts the clock on replacing every other original jalousie and non-impact opening. Call (850) 721-1218 and we’ll walk you through what a full-compliance path looks like for your specific Westchester home.
It depends entirely on the frame. If the extrusion is straight and unpitted and the frame can physically hold an impact-rated glazing assembly with a current NOA, retrofitting is a legitimate option. But Westchester’s salt-humid air pits aluminum faster than inland markets, and once a frame is bowed or corroded at the corners, full replacement is almost always the better use of your money. We’ll show you the frame condition in person and give you a straight answer.
Yes. Westchester sits inside Miami-Dade County’s High Velocity Hurricane Zone, and any window or door replacement requires a registered Miami-Dade contractor who can pull the permit and pass the NOA-label inspection. Working with an out-of-county crew that lacks Miami-Dade registration will leave you with a failed inspection and no path to close the permit. We are a locally owned, Miami-Dade registered contractor, and we pull permits on every job.
It’s the combination of humidity, airborne salt, and fine dust. Westchester’s mature oak canopy drops fine debris onto window sills, and those particles work into the vinyl balance channels along with salt-laden moisture from about 10 miles off the bay. The result is accelerated wear on the block-and-tackle assemblies. Rebuilding those balances with quality parts and cleaning the tracks properly usually adds years to the next service interval. For a quote on your 920 Series sashes, call (850) 721-1218.
Check the glazing label on the frame itself. Miami-Dade requires the NOA number to be physically visible on every impact-rated window or door, and the inspector will match that label number to the approved NOA on file with the county. If the label is missing, illegible, or doesn’t match the permit paperwork, the opening fails. We verify the labels before we leave the job, not after the inspector does.
Service Areas Near Westchester
Serving Westchester and the surrounding Miami-Dade communities. If you’re in Miami proper, Mr-Glass service in Miami covers the city’s older housing stock with the same HVHZ focus. In Hialeah, Mr-Glass service in Hialeah handles the 1950s and 1960s concrete homes there. Learn more about our Mr-Glass sales & service program across the county, and see our full Westchester service area for coverage details.
Book Your Mr-Glass Service in Westchester Today
Call Winslow Windows & Doors at (850) 721-1218 to schedule your free Mr-Glass estimate in Westchester. We answer the phone when you call, and we’ll send a background-checked, uniformed technician to your door. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Westchester and Miami-Dade County since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.