Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Roof Replacement & Installation in Westchester: What to Know First
PGT roof replacement and installation in Westchester typically runs $8,500 to $22,000 depending on roof size, pitch, and whether you’re replacing an existing system or installing new. As an independent PGT service provider, Winslow Windows & Doors handles the full job, roof tear-off through final inspection, usually in 3 to 5 working days. We give you a written line-item quote before any work starts, and that number does not change unless you change the scope.
This page is for Westchester homeowners who already own PGT products or are considering them for a roof replacement, and want a contractor who actually understands how PGT systems perform in South Florida weather. If you’re weighing repair against replacement, or just want a straight answer on cost, call (850) 721-1218 and talk to a live person, any hour, any day.
How PGT Products Fail, and How We Fix Them
PGT builds a solid product, but nothing lasts forever in Westchester’s sun, salt air, and hurricane seasons. Here’s what we actually see on job sites, not what the brochure says.
- Roof flange seal degradation on PGT storm panels and roof vents. The rubberized flange seals on PGT roof-mounted vents and panel anchors bake in South Florida heat and shrink over 8 to 12 years. Water creeps in around the fastener heads, especially on south-facing rooflines in Westchester. We pull the old sealant, replace the flanges, and re-bed everything with a polyurethane sealant rated for our UV exposure.
- Flashing failure where PGT roof glazing meets the deck. We see this on PGT’s 5400 and 7700 series where curb-mounted glazing meets roof decking. The original flashing was often done with whatever the general contractor had in the truck. We strip it, inspect the curb for rot, rebuild if needed, and flash it so water never sees the seam again.
- Aluminum curb corrosion on coastal-adjacent Westchester homes. Salt spray carries a lot farther inland than people think. PGT’s aluminum roof curbs get electrolytic pitting where they contact galvanized fasteners. It’s not a PGT defect, it’s a metal-to-metal reaction. We isolate dissimilar metals with neoprene gaskets and replace any curb legs that have lost structural integrity.
- Anchor pull-out on tile roofs with PGT roof attachment points. Barrel tile roofs in Westchester’s older sections often have PGT roof brackets anchored into mortar beds that crumble over time. When we do a roof replacement, we locate every anchor point and reset them into the decking itself, not the tile. That detail gets missed by roofers who don’t understand wind uplift math.
- Hail-impacted PGT skylight glazing that still passes a visual check. PGT skylights and roof windows can take hail hits that leave micro-fractures invisible from the ground. They fail later, dramatically, when a storm actually loads the glass. During any roof replacement, we inspect every PGT glazing unit close-up with a moisture meter and replace anything that shows stress lines.
If you’re in Westchester and your PGT roof components are showing any of these symptoms, call us before you have water in the ceiling. (850) 721-1218.
Our PGT Roof Replacement & Installation Process
Every PGT job follows the same disciplined path. No shortcuts, no surprises.
- 1
Call and schedule. You talk to a real person, never an answering service. We set a time that works for you, and Ed handles the estimate himself.
- 2
On-site diagnosis. We inspect the entire roof system: decking, underlayment, PGT roof components, flashing, drainage. You get a written report of what we found and what actually needs replacing.
- 3
Parts decision. We walk you through OEM versus quality aftermarket for anything PGT: seals, anchors, glazing, curbs. You decide based on your budget and how long you plan to stay in the house.
- 4
Roof work and PGT integration. Tear-off, deck repair, new underlayment, then roof covering. Every PGT component is reset, reflashed, or replaced at the same time so it all works as one system.
- 5
Testing and inspection. We water-test the PGT connections, verify anchors are seated, and pull any permits needed for Westchester and Miami-Dade code compliance.
- 6
The walk-through. You see everything we did. If something isn’t right, we fix it before you sign off. That’s the Done Right Promise, and it lasts.
What PGT Roof Replacement & Installation Costs in Westchester
Here’s what you can expect to pay for PGT-related roof work in Westchester. These numbers come from actual jobs we’ve done in the neighborhood, not national averages.
- PGT roof vent or anchor flange replacement: $450 to $1,200 per unit, depending on accessibility and condition of surrounding decking.
- PGT skylight or roof glazing replacement: $1,800 to $4,500 per unit, depending on size and whether we’re matching existing curb dimensions.
- Full roof replacement with PGT component reset: $8,500 to $22,000, driven by roof size, pitch, tile versus shingle versus metal, and how much decking repair is needed.
- PGT roof curb rebuild with corrosion remediation: $900 to $2,800 per curb, including flashing and sealant work.
What moves the price most is the condition of the decking and whether prior flashing work was done properly. Some Westchester homes need significant deck repair before new roofing goes on. We’ll show you exactly what we found and give you a line-item quote. Call (850) 721-1218 for your free estimate.
Why Westchester Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow grew up in Westchester, a few minutes from Tropical Park. He learned building science at Miami Dade College’s Wolfson Campus, and grew up on job sites with his dad, a general contractor. When Ed’s name is on the truck, his name is on the work. That’s not a slogan, it’s how he’s run Winslow Windows & Doors since 2011.
We answer the phone 24/7 with a live person. Our technicians are background-checked and show up in uniform, so you know exactly who’s at your door. We’re locally owned with a published address and license number. We install PGT, CGI, CWS, ES Windows, ECO Window Systems, and other elite brands, so we’re not married to one manufacturer when a different product serves your roof better.
The Done Right Promise is our standard warranty: if it’s not done right, we come back and make it right. Ed’s name is on the door, and on every job we do. The one down the road.
Frequently Asked Questions
Yes. If the roof decking and surrounding flashing are sound, we can replace the PGT glazing unit or the entire curb-mounted assembly without touching the rest of the roof. We’ll inspect first and tell you if the roof is close enough to end-of-life that doing both at once saves you money. Call (850) 721-1218 for an honest assessment.
Not automatically. Your PGT warranty covers manufacturing defects, not installation labor or sealant choices. We use OEM PGT components when they’re available and cost-effective, and quality aftermarket parts when they meet or exceed the spec. You get a clear choice either way. Call (850) 721-1218 and we’ll walk you through it.
Most full roof replacements with PGT component work take 3 to 5 working days, weather permitting. Tile roofs run longer. Ed gives you a schedule before we start, and we stick to it. Call (850) 721-1218 for a timeline specific to your roof.
No. Our quotes are line-item and fixed. The only way the price changes is if you ask us to add work, or if we open the roof and find structural damage nobody could have predicted, which we’ll document and show you before proceeding. Call (850) 721-1218 and get your written quote today.
Yes. We pull all required permits and pass all inspections before the job is closed. Westchester and Miami-Dade have strict wind-load and roof fastening requirements, and we build to them. Call (850) 721-1218 for a free estimate and a straight answer on your project.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.








Before
After
Before
After
Before
After