Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Double hung
Casement
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Westchester: What to Know First
We provide independent CGI energy-efficient window service and replacement throughout Westchester, and most window jobs are quoted within one business day. As an independent CGI service provider, we’re not tied to a factory script, which means we can tell you the truth about whether a specific window repair makes sense or whether replacement is the smarter long-term move. Pricing stays honest: line-item, upfront, and fixed. No change orders after the fact. If you own CGI windows in Westchester and your energy bills have crept up, a failed seal or worn weatherstripping is usually the culprit, and we’ll confirm it before recommending any work. Call (850) 721-1218 and Ed Winslow will pick up.
How CGI Products Fail - and How We Fix Them
CGI builds a solid window, but South Florida’s combination of salt air, humidity, and sun will eventually find the weak points. Here’s what we see most on Westchester homes and how we address each one.
- Seal failure on older CGI Estate and Custom Impact lines. The Estate series, especially units installed before 2015, runs an aluminum spacer that can eventually let moisture through. You’ll see fog between the panes or a milky film that won’t wipe off. We replace the insulated glass unit with a Low-E/argon combination rated for Miami-Dade, so your window ends up more energy-efficient than it was the day it was installed.
- Interlocking weatherstripping that’s lost its memory on CGI Estate casements. That compression seal along the sash is a wear item. After enough open-and-close cycles, it stops rebounding and you start feeling drafts at night. We don’t just slap on a generic foam strip - we source the proper pile and fin seal, and we check the sash alignment while we’re in there, because a sagging hinge mimics a weatherstripping failure.
- Gallery series tilt-latch and track wear causing air infiltration. On CGI Gallery sliders, a worn glide block lets the sash drop just enough to break the seal line. The window looks fine, but it leaks air. New glides and a cleaned, re-lubed track restore the original air tightness.
- Edge-of-glass thermal stress cracking from partial shade loads. This one fools people. A window that goes from direct sun to shade along one edge in a Westchester afternoon builds up real thermal stress, and older CGI glass without Low-E can give way in a hairline crack that’s impossible to catch until energy loss becomes noticeable. New laminated Low-E glass handles that differential heat far better.
- Frame extrusion fatigue at the mullion on wide CGI picture window runs. We don’t see this on every house, but on older wide openings we occasionally find the center mullion has worked loose enough to break the thermal barrier between two lites. We re-seat and re-shim the mullion, then re-flash the opening before re-installing the sash. Rushing this fix is how you get water where it shouldn’t be.
Our CGI Energy-Efficient Windows Process
Every job follows the same path, whether it’s a single fogged sash or a full replacement. Here’s what to expect when you call us for CGI work in Westchester.
- 1
You call, a person answers. Not a voicemail tree. Ed or a team member takes your details and schedules the diagnostic visit. Inside our home county, there’s no trip charge.
- 2
We diagnose in person. We don’t quote a window repair over the phone. One of our techs comes out, inspects the window, and tells you exactly what failed and what it will take to fix it.
- 3
You get a written line-item estimate. No verbal handshake. You’ll see the cost of parts, the cost of labor, and what it would cost to replace instead - so you can make a decision on real numbers, not a sales pitch.
- 4
We source the right parts. When OEM glass packages are available, we use them. When OEM timelines stretch out, we’ll offer a premium aftermarket Low-E/argon unit that meets or beats the original spec, and we’ll tell you exactly what the difference means for your warranty.
- 5
Install, test, and clean up. We install the glass or hardware, verify the seal with a thermal camera, and leave the work area cleaner than we found it.
- 6
You get the promise. The Done Right Promise applies to every CGI window job we do. If it’s not done right, we make it right.
What CGI Energy-Efficient Windows Costs in Westchester
Here’s a straight answer, because Westchester homeowners deserve one.
- Replacing one failed insulated glass unit (IGU) in a CGI Estate window: $275-$475 installed, depending on size and whether we go OEM or aftermarket Low-E/argon.
- Replacing weatherstripping and adjusting one CGI Gallery slider: $125-$225 per window.
- Full replacement of a standard 36″ x 60″ CGI window with a new energy-efficient unit: $550-$950 installed, including the window, under normal Westchester opening conditions.
- Full-home CGI energy retrofit (8-12 windows): $6,500-$14,000, with the final number driven by glass packages, frame material, and how much flashing and stucco work the openings need.
What moves the price: whether the glass is still under CGI’s seal failure warranty, whether the frames are reusable, whether a lift or scaffolding is needed for second-story work, and the Low-E coating tier you pick. We’ll walk you through every line item. Call (850) 721-1218 for a free estimate on your exact windows.
Why Westchester Homeowners Call Winslow Windows & Doors for CGI Work
We have been in this community for over 15 years. Ed Winslow grew up in Westchester, just a few minutes from Tropical Park, and he never left. That is not a marketing line. His name is on the truck and on every job we do. When you call, a live person picks up. When we quote, the price is fixed. And if a CGI window repair doesn’t hold up, the Done Right Promise means we come back until it is right. We install and service PGT, CWS, ES Windows, and ECO Window Systems alongside CGI, so if the time comes to replace rather than repair, we can give you honest comparisons without steering you to one brand. We have a published address and a visible license number. No shell companies. No ticket numbers.
FAQs
Yes. We are an independent CGI service provider, which means we can repair and replace CGI windows and we can use OEM parts when available, but our recommendations are not tied to what the factory tells us to sell. That independence is precisely why Westchester homeowners have us double-check CGI warranty guidance before spending money on a replacement they may not need.
No, not if the repair is done with compatible parts and the original frame is preserved, which is standard practice for us.
Most single-window replacements in Westchester are completed in one visit, 90 minutes to two hours from setup to cleanup. Full-home jobs typically finish in one to two days depending on the number of openings and any stucco or trim work required.
Yes. Bring us any written estimate from another contractor and we’ll review it at no charge. No pressure, just a straight read on whether the scope and price are honest. Call (850) 721-1218 and mention the estimate when you book.
The heavy lifting is done by Low-E coatings that reflect heat while letting light through, paired with argon gas fill between the panes and warm-edge spacers that keep the temperature differential from leaking at the edges. In Westchester’s humidity and sun load, the spec of that Low-E matters more than the brand name on the frame. We’ll pull the original window’s ratings and show you how an updated glass package compares.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.