Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Double hung
Casement
Before
After
Before
After
Before
AfterCGI Roof Repair in Westchester: What to Know First
CGI roof repair in Westchester typically runs $350 to $1,800 depending on whether we’re fixing flashing around a CGI skylight, replacing damaged curb-mounted glass on a CGI Roof Window, or resealing a failed penetration through the deck. Most jobs are completed same-day once we diagnose the issue, because we keep a working inventory of the seals, gaskets, and fasteners that CGI assemblies actually use. We’re an independent CGI service provider - not a manufacturer authorized dealer - which means we repair what’s failing instead of selling you a replacement you may not need.
If you’re a Westchester homeowner with a CGI roof product leaking, fogging, or showing stress cracks around the curb, this page tells you exactly what’s going on and what it costs to fix it right. Call (850) 721-1218 and you’ll get a live person on the line, not a voicemail. Ed Winslow has been working on South Florida homes since 2011, and his name is on every job we do.
How CGI Products Fail - and How We Fix Them
- CGI Roof Window curb flashing separation. Westchester’s afternoon thunderstorms hammer roof penetrations hard. We regularly see CGI Roof Windows where the aluminum curb flashing has pulled away from the roof deck after years of thermal expansion and wind-driven rain. The weld or sealant bond fails first, allowing water to track down the curb and into the drywall below. We remove the old flashing, re-flash with proper step flashing and sealant rated for metal-to-tile or metal-to-shingle transitions, and re-anchor the curb to the deck.
- Condensation between CGI Roof Window panes. If your CGI Roof Window has fog between the glass, the insulated glass unit’s perimeter seal has failed. This happens more in Westchester homes with high attic moisture from older ridge vents. We replace the IGU with an energy-rated unit matched to the original CGI frame dimensions. It’s a fraction of the cost of replacing the entire window.
- CGI operable roof window motor and chain wear. CGI’s venting roof windows use a motorized chain drive. We see gear wear in units installed before 2015 where the chain has stretched slightly and the window no longer seats flush when closed, leaving an air gap. We replace the chain assembly and recalibrate the motor. If the motor’s burned out, we source a compatible replacement rather than jury-rigging a fix.
- Impact glass stress cracks on CGI skylights. CGI’s laminated impact glass is tough, but it isn’t invincible. We’ve repaired skylights in the Bird Road area where fallen branches from storm winds left spider cracks in the outer lite without breaching the inner laminate. The IGU is compromised and needs replacement before water gets into the interlayer. We order the glass to size and spec, then swap it without touching the frame.
- Flashing failures on CGI turbo vents and roof penetrations. Homes with tile roofs in Westchester present a specific challenge: the tile profile doesn’t mate evenly with standard vent flashing. We see leaks around CGI vent bases where the original installer used a flat-flange flashing instead of a tile-profiled one. We custom-form lead or aluminum flashing to the tile contours, re-seat the vent, and seal with a roofing-grade polyurethane. That fix holds for decades.
Our CGI Roof Repair Process
- 1
You call, we answer. A live person picks up at (850) 721-1218. We ask what you’re seeing - a stain, a drip, fogged glass, a window that won’t close - and schedule a time that works for you. No trip charge inside our home county.
- 2
On-site diagnosis. A background-checked, uniformed tech arrives and inspects the CGI assembly from the roof and from inside the home. We trace the leak path, check the seal integrity, and test the glass unit for pressure failure.
- 3
Straightforward estimate. You get a written line-item quote before any work starts. We tell you whether the fix is a seal, a flashing replacement, or a full IGU swap - and what each costs. If you have another written estimate, bring it in. We’ll give you a free second opinion.
- 4
The repair. We use OEM CGI parts when available and quality aftermarket components when the OEM part is discontinued or backordered. For seals, gaskets, and flashings, aftermarket is often equal or better. For glass units, we match the original CGI thickness and impact rating.
- 5
Water test and cleanup. We run a minimum 15-minute water test on every repair that involves a seal or flashing. No water inside, no invoice. We sweep up, haul off any debris, and leave the roof looking like we were never there.
- 6
The Done Right Promise. If the repair fails because of our workmanship, we come back and make it right. That’s not a limited warranty. That’s Ed’s word. And Ed’s name is on the truck.
What CGI Roof Repair Costs in Westchester
Here’s what CGI owners in Westchester can expect to pay for the most common repairs:
| Repair Type | Typical Range |
|---|---|
| Flashing reseal around CGI Roof Window or vent | $350 - $650 |
| Chain or motor replacement on venting roof window | $425 - $800 |
| IGU replacement for fogged or cracked CGI glass | $700 - $1,500 |
| Full curb re-flash with tile-profiled flashing | $800 - $1,800 |
What moves the price: roof height and pitch, tile versus shingle, whether we need a lift for a second-story access, and whether OEM glass is required to preserve a remaining manufacturer warranty. We’ll tell you upfront which parts are worth the OEM premium and which aren’t. Call (850) 721-1218 for an exact quote - estimates are free, and we never hit you with change orders mid-job.
Why Westchester Homeowners Call Winslow Windows & Doors for CGI Work
We’re the one down the road. Ed Winslow grew up in Westchester and learned his trade at Miami Dade College’s Wolfson Campus before spending nearly two decades measuring, installing, and standing behind windows and doors for local homeowners. When a CGI roof product fails, you don’t want a national chain dispatch that’s never touched this brand before. You want someone who knows CGI’s assemblies, their failure points, and what it takes to make a repair that outlasts the original install.
We also service PGT, CWS, ES Windows, and ECO Window Systems products, which matters because many Westchester homes have mixed brands across their openings. One call covers all of it. Our techs arrive in uniform, background-checked, and ready to explain the fix in plain English. And behind every repair stands the Done Right Promise - if it’s not done right, we make it right. That’s a lasting standard no franchise can touch.
FAQs
No. As an independent CGI service provider, we perform repairs that preserve your warranty status whenever feasible. For glass replacements, we match CGI’s original laminated impact specs so the remaining frame warranty stays intact. If an OEM part is required to keep a warranty alive, we tell you that before we order anything.
Common seals, gaskets, fasteners, and motor assemblies are typically on hand or available within 2 to 3 business days from our Miami-area suppliers. Custom-sized CGI insulated glass units for skylights and roof windows usually take 7 to 10 business days. We’ll give you a realistic timeline at the estimate, not a best-case guess. Call (850) 721-1218 for exact lead times on your specific repair.
If the frame and curb are structurally sound, repair almost always wins. A seal or flash fix costs hundreds; a full CGI Roof Window replacement runs into the thousands. If the frame is corroded, the deck has rot, or the glass unit has failed in a way that compromises the impact rating, we’ll tell you straight. We don’t make money recommending replacements you don’t need.
Yes. Tile roofs are common throughout Westchester and present specific flashing challenges around roof penetrations. We custom-form flashings to the tile profile rather than forcing a flat flange to seal against a curved surface. That’s the difference between a repair that lasts a year and one that lasts twenty.
No. The number on your written estimate is the number on your invoice. If we open up a flashing and find deck rot or hidden damage, we stop, show you what we found, and give you an updated written quote before touching anything else. No surprises on the invoice - that’s been our rule since 2011. Call (850) 721-1218 for a free estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.