Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ECO Window Systems Shingle, Tile & Metal Roofing in Westchester: What to Know First
We’re an independent ECO Window Systems service provider in Westchester, and we handle shingle, tile, and metal roofing jobs tied to these products. Most repair calls get a same-day diagnosis and a written line-item quote before we touch anything, with most jobs completed inside of two days once parts are in hand. You’ll never get a change order on a Winslow job, and every roof we install or repair carries the Done Right Promise: if it’s not done right, Ed Winslow makes it right. If you own ECO Window Systems products in Westchester and the roof above them is failing, call (850) 721-1218. This page is for people who want the truth about what their roof actually needs, not what a commission-driven salesperson wants to sell them.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid product, but no window or door survives a bad roof installation above it. After years of working on Westchester homes, we see the same failure patterns repeat themselves. Here’s what actually happens:
- Leak migration through the ECO 5800 Series framing. The 5800 series single-hung and casement windows are popular in Westchester ranch homes, and their frames are well-sealed. The problem is rarely the window itself. When a shingle roof above a 5800 unit fails at the eave, water travels along the fascia and wicks into the window rough opening. By the time the homeowner sees a stain on the interior drywall, the flashing tape has been saturated for months. We pull the affected shingles, replace the peel-and-stick membrane, and re-flash the window-to-roof junction properly. The window usually doesn’t need replacement, just a dry opening.
- Tile roof weight transfer crushing top flanges on ECO fixed picture windows. Westchester has a lot of original barrel tile roofs from the 1960s and 70s. When a tile breaks near a window wall and rainwater pools at the head flashing, the weight of saturated underlayment presses down on the frame. On ECO fixed picture units, the top flange is aluminum and will deflect under that load, breaking the seal. Owners mistake this for a window defect. It’s a roofing deflection problem. We replace the broken tile, swap the compressed head flashing, and check the frame for square before re-bedding everything.
- Metal roof condensation dripping onto ECO sliding glass door tracks. Standing-seam metal roofs are fantastic in South Florida heat, but improperly vented roof cavities collect humidity at night. That condensation runs down to the lowest point, which on many Westchester layouts is directly above a patio slider. ECO sliding glass door tracks are designed to shed exterior water, not interior condensation. The fix is correcting the roof ventilation, not replacing the door. We add ridge and soffit vents in the right ratio, and the dripping stops within a week.
- Shingle granule wash clogging ECO window weep holes. This one’s subtle. Asphalt shingles lose granules every time a Westchester downpour hits. Those granules wash down the wall and clog the small weep holes at the bottom of ECO window tracks, particularly on the marine-grade coastal models. Trapped water then overflows the interior track. Most companies will replace the window. We clean the weep system, verify the roof’s granule loss is normal aging rather than defective shingles, and show the homeowner where the problem actually started.
- Flashing failures where tile roofs meet ECO Window Systems mullions. Multi-unit ECO mullion assemblies on wide window openings need precise flashing step-ups where the roof line meets the window head. Roofers who aren’t familiar with ECO frame dimensions will cut the step flashing too short, leaving a quarter-inch gap that leaks during wind-driven rain. We see this on at least one in five Westchester tile roof replacements. The fix is cutting new step flashing to the exact ECO frame depth and lapping each piece at least four inches.
Our ECO Window Systems Shingle, Tile & Metal Roofing Process
Every job starts with a phone call to (850) 721-1218, where a live person answers, day or night. Here’s how it goes from there:
- 1
We show up and look. A background-checked, uniformed technician arrives at your Westchester home, walks the roof line, and photographs everything relevant to the ECO Window Systems product below it. No charge for the trip inside our home county.
- 2
We identify the exact failure point. We trace water stains, pulled flashing, cracked tile, or thermal movement back to its source. If it’s a roof problem causing window symptoms, we say so and show you the evidence.
- 3
We price it in writing. You get a line-item quote with every material, every labor hour, and every permit fee listed separately. If a second company gave you a written estimate, we’ll review it free.
- 4
We do the work without surprises. The price we quote is the price you pay. No change orders unless you ask for additional scope, and even then you approve the number before we touch it.
- 5
We test before we leave. We run water over the repaired area, check the ECO Window Systems product for alignment and operation, and confirm drainage is flowing where it should.
- 6
We stand behind it. The Done Right Promise applies to every roof repair and installation we do. If something’s not right, Ed Winslow comes back and makes it right. Period.
What ECO Window Systems Shingle, Tile & Metal Roofing Costs in Westchester
Here are the real numbers for Westchester homes, based on what we’ve quoted and billed over the last several years:
- Small shingle repair at an ECO Window Systems wall junction: $350-$750
- Tile roof repair with window head flashing replacement: $600-$1,200
- Full flashing retrofit where a tile roof meets ECO mullions: $900-$1,800
- Standing-seam metal roof ventilation correction above an ECO slider: $1,500-$2,800
- Partial shingle re-roof with new drip edge and window flashing: $4,500-$9,500
What moves the price: roof pitch, number of pipe penetrations, whether the existing underlayment is salvageable, and how much of the ECO Window Systems flashing has to be pulled and reset. We don’t upcharge for the brand name, and we don’t pad hours. Call (850) 721-1218 for a free estimate with exact numbers for your roof. Seniors and veterans get 10% off, permanently.
Why Westchester Homeowners Call Winslow Windows & Doors for ECO Window Systems Work
Ed Winslow grew up in Westchester, a few minutes from Tropical Park, and never left. He learned building science at Miami Dade College’s Wolfson Campus, and he’s spent the better part of two decades measuring, installing, and standing behind windows, doors, and roofs for his neighbors. My name is on the truck. That means I stand behind every window and door we touch, and every roof that protects them. We’re also an authorized installer for PGT, CGI, CWS, and ES Windows, so if the roofing fix reveals a window or door that’s beyond saving, we can replace it with product we actually know, not something a supply house happened to have in stock. One call, one crew, one owner accountable for the whole exterior. The one down the road.
FAQs
No. We’re an independent ECO Window Systems service provider, not an authorized dealer, so our roof repairs don’t void your window warranty. We follow manufacturer-spec flashing details and use code-compliant materials, which keeps your coverage intact. If you’re unsure about a specific warranty clause, call (850) 721-1218 and we’ll walk you through it before we schedule anything.
A live person answers our phone 24 hours a day, and we typically diagnose the leak the same day you call. The repair timeline depends on parts and weather, but most shingle and flashing repairs are completed within 48 hours of diagnosis. For an exact schedule, call (850) 721-1218 and ask for Ed.
When the underlayment is saturated in more than two isolated spots, or when the existing flashing is so corroded or poorly lapped that patching would just delay the inevitable. If your roof is over 20 years old and your ECO Windows are still under warranty, a full replacement with proper flashing reset is usually the smarter money. We’ll tell you honestly which way to go, and give you a free second opinion on any written estimate you already have.
We use what’s correct for the specific ECO Window Systems series on your house. For frame-integrated components like head flashing receivers, we match the original spec. For roofing-side materials like step flashing, peel-and-stick membrane, and drip edge, we use code-approved products from brands we trust. The goal is a watertight roof-to-window transition that outlasts the shingle or tile above it. Call (850) 721-1218 for specifics on your product line.
No. The number on your written estimate is the number on your invoice, unless you add scope. That’s a promise Ed Winslow has kept since 2011, and it’s part of the Done Right Promise. If we find hidden damage after opening the roof, we stop, show you photos, and get your approval on a new number before continuing. No surprises, ever. Call (850) 721-1218 to schedule your free estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.








Before
After
Before
After
Before
After