Mr-Glass Window Replacement Nationwide | Winslow Windows & Doors

Mr-Glass Window Replacement: The Westchester Owner’s Guide

We stock and install Mr-Glass-compatible replacement windows for Westchester homes, with most full-unit replacements running between $850 and $2,400 installed depending on size, glass package, and frame condition. If your Mr-Glass window has a failed seal, cracked pane, or a sash that won’t operate, we can usually have the replacement ordered and scheduled within a week. Most Westchester owners discover the problem the same way: a foggy pane that won’t clear, a window that suddenly takes two hands to lift, or water beading in the wrong place after a South Florida downpour. What starts as a small annoyance is usually the first sign that the insulated glass unit has lost its seal or the balance system has worn out.

Call (850) 721-1218

Which Mr-Glass Models This Applies To

Mr-Glass manufactures a range of aluminum and vinyl window lines commonly found in Westchester homes built from the 1990s onward. The most frequent models we replace glass in are single-hung and horizontal slider units, but we also work on their casement and fixed-picture lines. The fastest way to identify your window is to check the spacer bar between the glass panes or the frame edge for an etched label, which will show the manufacturing date, glass specifications, and sometimes the series code. If the label has worn off, measure the visible glass area (not the frame), and we can match it from that. For Mr-Glass windows specifically, we recommend OEM glass when the unit is still under warranty, but for out-of-warranty windows, quality aftermarket insulated glass with equivalent Low-E and argon fill performs just as well and costs about 20 to 30 percent less. One compatibility gotcha: Mr-Glass sliders built before 2005 often used a non-standard sealant channel depth, so a generic glass pack may not seat properly without a custom spacer, which we verify before ordering.

Signs Your Mr-Glass Window Replacement Is Failing

• Persistent fogging or condensation between panes. This means the seal on the insulated glass unit has failed, and the argon or krypton gas has escaped. In Westchester’s humidity, this shows up fast and won’t go away once the seal is gone.
• The sash suddenly got much heavier or falls shut. The spring balance or block-and-tackle system inside the frame has worn out. This is common on Mr-Glass single-hungs from the early 2000s, especially on windows that get opened daily.
• Visible cracks, even hairline ones. Impact glass can take a hit and keep its shape, but a stress crack spreads over time with Miami heat cycling. If you can catch a fingernail on it, it’s time to replace the pane.
• Water pooling on the interior sill after rain. This usually points to a failed weatherstrip or a frame channel that has shifted. Left alone, it rots the sill and can damage drywall below the window.
• The window won’t lock or no longer seals tightly. Worn cam locks or bent keepers let air and water through. In hurricane season, that’s a problem you don’t want to test with the first named storm.

Replacement Cost & What’s Included

In Westchester, the installed price for a Mr-Glass window replacement depends on three things: glass package, frame condition, and access. A standard 36-by-48-inch single-hung insulated glass replacement typically runs $850 to $1,400 installed. Add impact-rated glass and that climbs to $1,600 to $2,400 for the same size. If the frame itself is corroded, which we see regularly on aluminum windows in this neighborhood from years of salt air and sprinkler overspray, you’re looking at full-unit replacement rather than glass-only, which is the upper end of that range. Our quote includes the glass, labor, sealant, disposal of the old unit, and a workmanship warranty. We don’t quote a price and then add a line item for caulk on the back end. When we hand you a number, that’s the number.

And yes, we pull the permits when the job requires them, which is standard for full-frame replacements in unincorporated Miami-Dade County. The final invoice matches the proposal unless we uncover something structural that no one could see until the old window came out, and we’ll show you what we found before doing anything else.

DIY or Call Us?

For a window replacement on a Mr-Glass unit, there’s not much safe middle ground. You can absolutely clean the tracks, check for obvious gaps in the weatherstrip, and confirm which pane is fogged. What you shouldn’t do is try to replace an insulated glass unit yourself. The glass packs are heavy, the sealant channels have to be cleaned to bare metal for a proper bond, and a dropped pane on a second-story window is a hospital visit waiting to happen. A window that’s out of square by even a quarter inch will leak air and water, and you won’t know until August. Also, if the window is impact-rated, the glass needs to match the original design pressure rating for the opening, or your house is the weak point in the next hurricane. That’s not something we take lightly, and it’s why Ed Winslow sends a trained technician to measure, match, and install every unit we touch. My name is on the truck. That means I stand behind every window and door we touch. If you’re in Westchester and want a straight answer, call us at (850) 721-1218.

FAQs