Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Double hung
Casement
Before
After
Before
After
Before
AfterMr-Glass Roof Repair in Westchester: What to Know First
We repair Mr-Glass roofing systems in Westchester as an independent Mr-Glass service provider, and most jobs are done within 2 to 5 business days once we’ve had eyes on the roof. Honest numbers up front: a typical Westchester Mr-Glass repair lands between $275 and $650 depending on what actually failed, and you’ll get a written line-item quote before we touch anything. If you’ve got a Mr-Glass roof that’s leaking, lifting, or showing age, this page is written for you. Call (850) 721-1218 and a live person answers, not a voicemail tree.
Mr-Glass makes architectural glass and glazing systems, including skylights, glass roof panels, and structural glass assemblies that show up on higher-end Westchester homes, especially the ones built or renovated between 2005 and 2020. Those systems are beautiful when they’re sealed right and a serious headache when they’re not. Ed Winslow’s name is on the door, and after 15 years of fixing the glass-and-structure marriage in South Florida, we know exactly where Mr-Glass roof systems fail first.
How Mr-Glass Products Fail - and How We Fix Them
Every glass roof system has a personality. Mr-Glass products are no exception. Here’s what we actually see on Westchester roofs, by failure type, and what we do about each one.
- Gasket decompression on Mr-Glass structural glazing channels. The rubber gaskets that hold Mr-Glass panels in their frames lose elasticity after 8 to 12 years of South Florida heat and UV. Once the gasket relaxes, the panel shifts a few millimeters, water finds the gap, and you get a slow ceiling stain that no amount of caulk from above will fix. We remove the panel, clean the channel, install fresh EPDM gaskets, and re-seat the glass to factory pressure. Caulking over a failed gasket is a band-aid; we replace the part that failed.
- Weep-hole blockage on Mr-Glass sloped glazing. Mr-Glass sloped systems rely on internal weep channels to shed condensation and incidental water. In Westchester, oak pollen, pine needles, and the grit that blows off the Palmetto Expressway all collect in those channels. Once blocked, water backs up and drips inside even when it hasn’t rained. We clear the weeps, flush the drainage path, and check that the internal slope is still doing its job. This one’s a $275-to-$450 fix in most cases, and it’s the most common call we get for Mr-Glass roofs.
- Thermal stress fracturing at the panel edge. Mr-Glass panels are thermally tempered, but the edge zone just inside the frame is still the weak point. When a Westchester afternoon thunderstorm hits a sun-heated panel, the rapid temperature drop can start a hairline crack at the edge that grows over weeks. If caught early, we can stabilize and seal the panel. If it’s progressed, we order a direct replacement panel and swap it without disturbing the surrounding glass.
- Frame-to-deck flashing separation. On sloped Mr-Glass installations over living space, the connection between the aluminum frame and the roof deck is sealed with a flashed curb. We see separation there on homes within a mile of the coast, where salt air accelerates the breakdown of the original sealant. Our fix is to strip the old sealant, mechanically refasten the frame where needed, and re-flash with a marine-grade sealant that’s not the same product the original installer used. It lasts twice as long.
- Condensation between the lites in Mr-Glass insulated roof units. If you’re seeing moisture between the glass layers, the unit’s edge seal has failed. No amount of drying fixes that; the panel is done. We replace the insulating glass unit itself, keeping the original frame if it’s sound. That saves real money versus a full panel replacement, and we can often match the original coating package so the new panel disappears into the roof.
Our Mr-Glass Roof Repair Process
- 1
You call, a person answers. Not a call center. You tell us what you’re seeing. If it sounds like active water entry, we ask for photos so we can estimate scope before we arrive.
- 2
We inspect the whole system, not just the symptom. A Mr-Glass roof has multiple panels, even if only one is leaking. Ed grew up on job sites before he ever set foot in a classroom, and that means he thinks about failure in systems, not parts. We map every seal, gasket, and flashing path while we’re up there.
- 3
Parts decision: OEM where it matters, quality aftermarket where it doesn’t. For visible glass and structural panels, we use Mr-Glass OEM or exact-spec equivalents. For gaskets, sealants, and flashings, we use materials that are equal to or better than what was originally installed. You’ll know which is which before we order anything.
- 4
The repair happens with the surrounding glass protected. Our techs are background-checked and uniformed, and they know how to work a glass roof without creating a new problem three feet from the one they’re fixing.
- 5
We test, clean, and walk you through it. Water test where appropriate, inspection of every joint we touched, and a clear explanation of what we changed and why.
- 6
The bill matches the quote. Upfront pricing. No surprises on the invoice. If we find something mid-job that changes scope, we stop and call you before any additional work happens.
What Mr-Glass Roof Repair Costs in Westchester
Here’s what Westchester homeowners tell us they’ve been quoted elsewhere and what we usually come in at:
- Weep-hole clearing and drainage flush: $275 to $450
- Gasket replacement per panel: $350 to $600
- Edge-crack stabilization and seal: $300 to $500 per panel
- Flashing separation repair at the frame curb: $450 to $850
- Replacement insulated glass unit (per panel): $700 to $1,400 depending on size and coating
- Full Mr-Glass roof panel replacement: $1,200 to $2,800 per panel
The price moves on three things: panel size, roof accessibility (single-story Westchester ranch versus a two-story with a steep pitch), and whether the frame itself is intact. A failed gasket on a sound frame is a cheap fix. A failed frame is a different conversation. Call (850) 721-1218 for a free estimate. You’ll get a written line-item quote you can hold us to.
Why Westchester Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’re the one down the road. Ed grew up in Westchester, a few minutes from Tropical Park, and he’s never really left. Learned the trade at Miami Dade College’s Wolfson Campus, built the company in 2011, and spent the better part of two decades measuring, installing, and standing behind glass systems for Westchester homeowners. When a Mr-Glass roof needs work, you want the person who knows how the glass meets the frame. That’s us.
And here’s the part that matters when writing the check: every repair we do carries the Done Right Promise. If it’s not done right, we make it right. That’s a lasting standard, and it’s not marketing copy. It’s how we’ve operated since 2011. We’re also authorized installers for PGT, CGI, CWS, and ES Windows, which means when a Mr-Glass job turns into a bigger question, we’re not guessing at how it fits the rest of your house. We know the other top brands in the market, their specs, and their failure points.
Plus: $40 off any repair over $200, free second opinions on written estimates, no trip charge inside our home county, and a permanent 10% discount for seniors and veterans. Those aren’t promotions with an expiration date. They’re standing offers, every day.
FAQs
In most cases, warranty coverage on Mr-Glass roof systems is tied to the original installation and the install date, not to who performs maintenance. Sealed-unit failures often fall outside the manufacturer warranty window after the first 5 to 10 years, and Westchester’s climate tends to age those seals on the early side. Repairs that involve replacing gaskets, clearing drainage, or re-flashing do not affect the warranty status of the glass panels themselves. If we’re looking at a part that might still be covered, we’ll tell you before quoting a repair. Call (850) 721-1218 and we’ll help you sort it out.
Yes, in the vast majority of cases. Mr-Glass uses standardized low-E coatings and tint layers that are documented per panel. We pull the original spec, order the matching insulated glass unit, and install it so the new panel is indistinguishable from its neighbors in color and reflectivity. Where exact OEM glazing is no longer available, we’ll show you the closest options with a sample before ordering.
For active leaks, we make Westchester a priority and can typically get someone on your roof within 24 to 48 hours for a temporary seal and assessment. Permanent repairs follow as soon as parts are in hand. Water doesn’t wait, and neither do we. Call (850) 721-1218 any hour. A neighbor you can call at 2 a.m. - and someone will actually answer.
When three or more panels show edge-seal failure, the flashing has separated in more than one place, and the frame is losing structural integrity, replacement starts making more financial sense than piecemeal repairs. We’ll give you both numbers side by side, honestly. The Done Right Promise means we’d rather tell you the truth than sell you a repair that won’t hold.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Westchester and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.