Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Double hung
Casement
Before
After
Before
After
Before
AfterGarden Windows in Westchester, FL | Winslow Windows & Doors
A garden window is a projecting box-style window with glass on three sides and a built-in shelf at the base. It’s the window that turns an ordinary kitchen wall into a greenhouse display. In Westchester, where sunlight and humidity define daily life, homeowners love these windows for herbs, orchids, and natural light without giving up hurricane protection. Winslow Windows & Doors installs impact-rated garden windows across PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass product lines, fitted to Florida Building Code High-Velocity Hurricane Zone requirements. If you’re researching garden windows for a Westchester home, call (850) 721-1218 and we’ll walk you through the options, measurements, and permitting path.
Product Overview - Garden Windows
Garden windows are a distinct architectural profile. Instead of sitting flush with the wall, they project outward like a small glass box, typically 12 to 18 inches. That projection creates a three-sided glass display area and a shelf sill at the bottom where plants catch light from multiple angles. In a hurricane-prone region, that shape presents an engineering challenge. Every pane has to resist wind pressure, debris impact, and water intrusion while maintaining the projecting form.
The impact-rated garden windows we install in Westchester address that directly. The glass on all three exposed sides is laminated impact glass with a PVB (polyvinyl butyral) interlayer that holds the pane in its frame even under impact. The frame itself is available in aluminum or vinyl, depending on the home’s opening and wind zone requirements. The shelf sill is part of the extruded profile, not an add-on, so water management runs through the full system rather than relying on caulk at a seam. These are windows built for Florida, not generic sunroom components adapted to it.
Architecturally, garden windows work well in kitchens above a sink, in breakfast nooks, and in laundry rooms where a little extra daylight changes the feel of the space. They’re a common retrofit in Westchester’s older concrete-block homes, where a flush window replacement opens the door to a projecting profile without structural wall changes.
Technical Specifications
Here’s the specification sheet for the garden windows we sell and install in Westchester. All figures reflect what’s available across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines.
- Frame materials: Aluminum, Vinyl
- Glass options: Laminated Impact Glass (PVB Interlayer), Low-E Insulated Glass, Tinted Glass, Clear Glass
- Finish options: White, Almond, Bronze, Black, Tan
- Sill: Shelf Sill (integrated into the frame profile)
- Design pressure: Matched to your wind zone, up to +/-100. We never push a rating higher than the zone requires.
- Compliance: Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers available per configuration; engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements.
Hurricane & Compliance Performance
The performance of an impact garden window in Westchester comes down to specific engineering choices. These are the six features that matter most.
Laminated Impact Glass
Each pane of glass in the garden window carries a PVB interlayer. Under impact, the glass may crack but stays bonded to that interlayer and remains in the frame. That keeps wind, rain, and debris outside the home during a storm. This is the same glazing technology used in the rest of our hurricane-impact product lines across Westchester installations.
Miami-Dade NOA / Florida Product Approval
The garden window configurations we install carry Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers. These are issued per specific configuration, meaning the glass package, frame material, and size all factor into the approval. We verify the exact approval number on your quote so your permit application moves without surprises.
FBC / HVHZ Compliance
These garden windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Westchester sits in a wind-borne debris region, so HVHZ-rated products are not optional here. They’re the standard. The flashing, anchoring, and glazing details all follow FBC paths for HVHZ construction.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated products earn their approval through a testing protocol family. TAS 201 covers large-missile impact, firing a length of lumber at the glass to simulate flying debris. TAS 202 covers cyclic wind-pressure loading, simulating the repetitive pressure cycles of a hurricane. TAS 203 covers forced-entry resistance. Our garden window configurations have passed these protocol families where applicable to the product.
Design Pressure for Your Wind Zone
The garden window’s design pressure is matched to the wind zone of your Westchester property, up to +/-100 and never higher. Overspecifying beyond what the zone requires adds cost without adding protection. We pull the wind zone data for your address and match the product rating exactly.
Energy Performance
Low-E and insulated glass options are available for the garden window package. Low-E coatings cut solar heat gain, which matters in a projecting glass box that catches sun from three directions. Insulated glass adds another layer of thermal separation. Clear and tinted options round out the lineup for different aesthetic and glare-control needs.
Color & Glass Options
The garden window’s finish options include White, Almond, Bronze, Black, and Tan. In Westchester, we see a mix of architectural styles. Older Florida ranch homes and Mediterranean-tinged construction tend toward Almond and Tan, which hide mineral scaling from sprinkler overspray better than bright white. Black frames have become common on modern and transitional remodels, especially where the window sits against a darker exterior accent or a contrasting stucco tone. Bronze works well on homes with existing bronze aluminum windows from the 1970s and 1980s, many of which still dot Westchester neighborhoods.
On the glass side, laminated impact glass is the baseline for every pane in the garden window. From there, homeowners choose clear or tinted glass for glare control, or Low-E insulated glass when the window faces direct south or west sun and the room already runs warm. The Low-E option tends to matter in Westchester kitchens that catch afternoon heat, where a projecting window adds solar gain that a flush window never did.
Installation by Winslow Windows & Doors in Westchester
We install garden windows in Westchester under AAMA 2400/2410 industry practice, which governs installation methods and workmanship for windows in buildings. That’s the standard we hold every crew to, on every opening, regardless of product line.
A proper garden window install starts before the old window comes out. We inspect the rough opening for rot, termite damage, and out-of-square framing. Coastal humidity in Westchester means moisture intrusion hides behind old windows more often than homeowners expect. We check the opening with a level and square before the new unit ever leaves the truck. The window gets shimmed and set level, plumb, and square, then anchored to the structure per the manufacturer’s approved anchoring schedule and FBC requirements for the wall type.
The perimeter is sealed with AAMA 812 low-expansion foam and a compatible sealant system. Water management matters more on a projecting window than a flush one because there’s a top, a bottom, and two side projections to detail. We test the install for water intrusion before finishing the interior trim, then we clean the opening, haul the old window, and leave the site ready for your final inspection.
In Westchester, where the wind zone and permitting rules can vary block by block, we also handle the permit-side awareness: your garden window quote includes the config-specific NOA or Florida Product Approval documentation for submittal. An improperly installed garden window compromises the entire NOA-rated system. The engineering is only as good as the installation. That’s why we don’t subcontract this work, and why we document every step.
Frequently Asked Questions - Garden Windows
The garden window’s design pressure is matched to the wind zone of your specific Westchester property, up to +/-100 and never higher. We pull the wind zone data for your address during the quote process and match the product configuration to that zone. Call (850) 721-1218 with your address and we’ll confirm what your opening requires before you commit to a product line.
Lead times vary by product line and the glass and finish configuration you select. Custom sizing or less-common finishes typically add time compared to stock configurations. When you receive your quote from Winslow Windows & Doors, we include the current lead-time estimate for that specific product and the date we can schedule installation. Call (850) 721-1218 to get a current lead time for the PGT, CGI, CWS, ES Windows, ECO, or Mr-Glass configuration you’re considering.
Yes. In Westchester, a garden window in an HVHZ wind-borne debris region typically requires the NOA or Florida Product Approval documentation as part of the permit submittal. The approval number is issued per configuration, meaning the exact glass, frame, and size combination on your quote has its own documentation. We provide that paperwork with your quote so the permit process doesn’t stall. Our team handles this routinely for Westchester permits.
Garden windows are available in a range of standard sizes across our product lines, and some configurations allow custom sizing within engineering limits. The constraints come from the NOA and Florida Product Approval packages, which are tied to specific size and configuration ranges. If you have an opening that’s an unusual size, we’ll tell you during measurement whether the garden window profile works or whether another impact window profile better fits the opening. Call (850) 721-1218 to discuss your rough opening dimensions.
Maintenance is straightforward. Clean the frame and shelf sill with mild soap and water, avoid abrasive cleaners on the finish, and inspect the perimeter sealant once a year for gaps or shrinkage. In Westchester’s climate, we recommend checking the exterior weep holes for blockage after heavy rain or landscaping work. If you notice condensation between the glass panes or a cracked exterior pane, call us. Impact glazing that’s been compromised needs replacement, not a patch.
Get a Quote - Garden Windows in Westchester
Choosing a garden window means sorting through glass packages, frame materials, finishes, and the right product line for your wind zone. We make that simple. Winslow Windows & Doors provides free on-site measurements in Westchester, a written line-item quote, and the approval documentation you need for permit submittal. Call (850) 721-1218 to schedule your measurement.
Written by the team at Winslow Windows & Doors, serving Westchester, FL with hurricane-impact window and door installation.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images
