Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Impact Garage Doors in Westchester, FL | Winslow Windows & Doors
Impact garage doors close out the largest opening on your home to the same wind-zone standard as every other opening in your impact package. That’s the whole point, and it’s why so many Westchester homeowners put this product on their punch list when they’re upgrading windows and doors. A garage door is typically 16 feet wide or more. If it fails during a storm, the pressure inside your house changes in seconds, and then the roof goes looking for a new address. We’re Winslow Windows & Doors, a factory-trained installer serving Westchester and the surrounding Miami-Dade corridor, and we install this product the way the Florida Building Code and Miami-Dade County expect it installed. Call (850) 721-1218 to talk through your opening sizes and schedule a free site measurement.
Product Overview - Impact Garage Doors
The Impact Garage Doors product is a hurricane-code-approved garage door system engineered for one job: keeping your garage opening sealed at the same design pressure the rest of your house is rated for. In Westchester, where pretty much every block sits inside a High-Velocity Hurricane Zone, the garage door is no longer the weak link in a storm plan. It’s part of the envelope.
The standard build is an insulated steel panel door. It’s heavy, rigid, and braced internally so it doesn’t oil-can when wind loads cycle across the face. For homeowners who want daylight in the garage or a more architectural look, optional glass panel inserts are available. Those inserts use laminated impact glass, not standard tempered glass, so they’re part of the same tested assembly as the steel panels.
Where this product fits in Westchester is straightforward. It suits the 1960s ranch homes south of Bird Road, the newer two-story builds near Tropical Park, and the Mediterranean-style homes scattered through the neighborhoods around Coral Way. The door tracks, hardware, and panel sections are all specified to carry the wind load together. Nothing on this product is decorative afterthought hardware. Every bracket, hinge, and reinforcing stile is part of the wind-load path.
Our team at Winslow Windows & Doors has installed impact-rated openings across Westchester for years, and we’ve seen what happens when a big-box door gets put into a wind-rated opening without the right reinforcing. It’s not pretty. The product matters, but the install matters just as much. That’s why we’re factory-trained on this line and why we run our own field checks before any panel goes up.
Technical Specifications
Here’s how the Impact Garage Doors product breaks down, in plain language. These are the specs we work from when we spec your job in Westchester:
- Frame material: Insulated steel panel construction, designed as a reinforced assembly rather than a single skin
- Glass options: Insulated Steel Panel (non-glazed, solid) or optional Glass Panel Inserts using laminated impact glass
- Finish options: White, Almond, Sandtone, and Black - all factory-applied finishes
- Design pressure: Matched to your specific wind zone, up to +/-100 - never rated higher than your zone requires
- Configuration: Custom sizes and panel layouts available to match your existing opening
- Glazing option notes: Low-E / insulated glass options available on glass-insert configurations for better thermal performance
We spec every door to the actual opening, not the other way around. If your garage is a non-standard width or height, that’s a conversation we’re happy to have at (850) 721-1218.
Hurricane & Compliance Performance
The compliance story on this product is the reason it exists. These are the components and certifications that matter in Westchester and throughout Miami-Dade County.
Laminated Impact Glass
Where glass inserts are selected, the panels use laminated impact glass with a PVB (polyvinyl butyral) interlayer. Under large-missile impact, the glass may crack, but the interlayer holds the glass in the frame so the opening stays closed and the pressure envelope stays intact. That’s the entire game.
Miami-Dade NOA / Florida Product Approval
Impact Garage Doors carries Miami-Dade NOA (Notice of Acceptance) and Florida Product Approval numbers, issued per configuration. Every size and glass/panel combination is approved individually, so we verify the exact numbers against your specific quote before anything gets ordered.
FBC / HVHZ Compliance
The product is engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. In Westchester, that’s the standard your permit reviewer is going to look for, and it’s the standard this door meets.
TAS 201 / 202 / 203 Testing Context
This is the protocol family HVHZ-rated products are tested under. TAS 201 covers large-missile impact. TAS 202 covers cyclic wind-pressure loading, which simulates the repeated pressure swings of a real hurricane. TAS 203 covers forced-entry resistance. If a product in Miami-Dade is talking about impact compliance, it’s talking about these tests.
Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100 - never higher. That’s deliberate. There’s no reason to pay for a +120/-120 rating when your zone calls for +80/-80. We read the structural calcs for your specific opening and match the door to what the engineer signed off on.
Energy Performance
Low-E and insulated glass options are available on glass-panel configurations. The insulated steel panel option, which is the standard non-glazed build, already gives you a thermal break that a single-skin door won’t. For a garage that’s attached to the house or conditioned, that matters.
Color & Glass Options
The Impact Garage Doors line comes in four finishes: White, Almond, Sandtone, and Black. White works on the clean-lined Florida modern and Key-West-style homes you see in Westchester’s newer builds. Almond and Sandtone are the forgiving choices for the older Miami-Dade palette: stucco in warm beige, coral stone accents, clay roof tiles. They hide dust and salt haze better than white, which matters within a few miles of the coast. Black is the statement finish. It photographs beautifully against white stucco and works on the more contemporary homes going up off Bird Road, but it does show water spotting after dry-season dust events.
On glass, you’ve got two paths. The insulated steel panel is the workhorse: solid, opaque, best for garages used as workshops, storage, or anything you don’t want visible from the street. The glass panel inserts change the look of the whole house. They’re available with low-E or insulated glass, which means you get the light without turning the garage into an oven in August. In Westchester, where south-facing garages bake all afternoon, that’s not a small detail.
Installation by Winslow Windows & Doors in Westchester
Here’s how we install this product, and why the installation matters as much as the door itself.
Every job starts with a pre-install inspection. We measure the rough opening, check the condition of the jambs and header, and verify that the track path is clear. In Westchester, we see older homes where the garage jamb has been patched over after termite damage or settling, and if we’re hanging a wind-rated door on a compromised jamb, we’re building a failure. So we look first.
The door goes in level, plumb, and square. Not close. Not “basically straight.” The tracks are set so the rollers travel true, and the panel sections stack evenly. We install perimeter sealing per AAMA 812 practice using low-expansion foam sealant, which seals the gap without bowing the frame. The full installation follows AAMA 2400/2410 installation practice. That’s not a certification on the door; that’s how we do the work.
After the door is hung and running, we do a water test and a full cycle test: up, down, balance, track alignment, opener integration if applicable. We check the seal line and inspect every bolt. Then we close the door for the last time and go over the documentation with you.
One thing worth saying plainly: an improperly installed impact garage door is not an impact garage door. If the frame isn’t anchored per the approved drawings, the NOA rating means nothing. If the seal line is gapped, water gets driven in during a storm and so does the wind. In Westchester, where the exposure is real and the permitting authority reviews every product approval, a professional install is the only way this product does what it’s supposed to do.
Frequently Asked Questions - Impact Garage Doors
The product is rated up to +/-100 design pressure, matched to your specific wind zone in Westchester. We don’t oversell a rating your zone doesn’t require. Your engineer’s structural calculations determine the required design pressure, and we match the door configuration to that number. Call (850) 721-1218 and we’ll walk through your opening and what your zone requires.
Lead time depends on the configuration: panel type, glass inserts, finish, and opening size. Custom-sized openings take longer than standard ones. Once we’ve confirmed your specs and the product approval numbers match your configuration, we can give you a real date. Skip the guesswork and call (850) 721-1218 for a current estimate on your specific door.
Yes. Any impact-rated opening in Westchester requires documentation tied to your exact configuration. The NOA and Florida Product Approval numbers are issued per configuration, so we verify them against your specific quote and include them in the permit package for your job. Call (850) 721-1218 if you want us to review your current permit requirements.
Yes. We quote every Impact Garage Doors product to the actual opening size, not a stock size. Panel configuration, glass insert placement, finish, and track layout can all be adjusted to match your garage and the look you’re after. We’ll measure on site and spec the exact combination that works. Call (850) 721-1218 to schedule a free measurement.
Maintenance is simple: keep the tracks clean, inspect the seal line once a season, wash the panels with mild soap and water, and don’t pressure-wash close enough to cut the perimeter seal. If a roller starts sounding rough, don’t wait. We’re in Westchester and we service what we install. Call (850) 721-1218 and we’ll come take a look.
Get a Quote - Impact Garage Doors in Westchester
If you’re replacing a garage door or building new in Westchester, let’s get you a real number. We’ll measure your opening, check the existing jambs and header, confirm your wind zone, and put together a written quote with the exact configuration and product approval numbers. Call Winslow Windows & Doors at (850) 721-1218 to schedule your free on-site measurement.
Written by the team at Winslow Windows & Doors, serving Westchester, FL and the surrounding Miami-Dade corridor.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other Winslow Windows & Doors Services
What Neighbors Say About Winslow Windows & Doors
Detailed Images








Before
After
Before
After
Before
After